Good Reputation Bevel Car Small Reverse Gear Reducers for Belt Conveyor

Good Reputation Bevel Car Small Reverse Gear Reducers For Belt ConveyorOur Gearbox has many items for your choosing and we can produce as per your drawing or sample to meet your special request1. Large output torque2. Safe, reliable, economical and durable3. Stable transmission, quiet operation4. Hi......

Send Inquiry

Product Description

Good Reputation Bevel Car Small Reverse Gear Reducers For Belt Conveyor

Our Gearbox has many items for your choosing and we can produce as per your drawing or sample to meet your special request
1. Large output torque
2. Safe, reliable, economical and durable
3. Stable transmission, quiet operation
4. High carrying ability
5. High modularization design, may equip with various outer power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type
6. Transmission ratio: Fine division, wide scope. The combined machine type may form very large transmission ratio, i. E. Output very low rotary speed.
7. Form of installation: The position to be installed is not limited.
8. High strength, compact the box body of high strength cast iron, gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
9. Long life: Under the condition of correct type chosen(including choosing suitable operation parament ) normal operation and maintenance, the life if main parts speed reducer(except wearing parts)should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
10. Low noise: Because main parts of speed reducer are processed, and tested critically, therefore the noise of speed reducer is low.
11.Our gear box have reached the advance international level, can replace the same kind of products imported.

Item No.	9.311
Ratio	1:3
Teeth	12/36
Module	4.35
HP	50
Rated Input	540rpm
Input/Output Description	Hexagon Spline
Input/Output Description		Optic Axis
Net Weight	21kg

Item No.	AG135
Ratio	1:1
Teeth	20/20
Mould	6.0
Rated Input	640rpm
Input/Output Description	Hexagon Spline(1 3/8 Z6)
Input/Output Description		Hexagon Spline(1 3/8 Z6)
Net Weight	17kg

Item No.	BGB9-1	BGB9-2
Ratio	1:1.35	1:1.46
Teeth	17/23	15/22
Module	5.0	5.0
HP	46	46
Rated Input	540rpm	540rpm
Input/Output Description	Hexagon Spline(1 3/8 Z6)
Input/Output Description		Hexagon Spline(1 3/8 Z6)
Net Weight	23kg	23kg

Item No.	CX-281
Ratio	1:1
Teeth	19/19
Module	4.5
Rated Input	540rpm
Input/Output Description	Hexagon Spline (1 3/8 Z6)
Input/Output Description		Optic Axis
Net Weight	7.5kg

Item No.	GT40U
Ratio	3:1
Teeth	11/33
Module	5.0
HP	30
Rated Input	540rpm
Input/Output Description	Hexagon Spline(1 3/8 Z6)
Input/Output Description		Optic Axis
Net Weight	27.2kg

Item No.	HC-012-11
Ratio	1:2
Teeth	10/20
Module	3.0
HP	10
Rated Input	540rpm
Input/Output Description	Optic Axis
Input/Output Description		Optic Axis
Net Weight	3.8kg

Item No.	HC-30
Ratio	1:2.83
Teeth	12/34
Module	3.5
HP	30
Rated Input	540rpm
Input/Output Description	Hexagon Spline ( 1 3/8 Z6 )
Input/Output Description		Optic Axis
Net Weight	17kg

Item No.	HC-205JC
Ratio	1:147
Teeth	15/20
Module	5.0
Rated Input	540rpm
Input/Output Description	Hexagon Spline ( 1 3/8 Z6 )
Input/Output Description		Cone base aequilate spline shaft
Net Weight	16kg

Item No.	HC-650
Ratio	2.92:1
Teeth	13/38
Module	4.25
HP	30
Rated Input	540rpm
Input/Output Description	Optic Axis
Input/Output Description		Optic Axis
Net Weight	24.1kg

Item No.	HC-756
Ratio	1:1
Teeth	17/17
Module	6.35
Rated Input	540rpm
Input/Output Description	Hexagon Spline ( 1 3/8 Z6 )
Input/Output Description		Hexagon Spline ( 1 3/8 Z6 )
Net Weight	25kg

Item No.	HC-0762-1	HC-0762-2
Ratio	1.46:1	1.92:1
Teeth	15/22	12/23
Module	5.65	5.5
HP	40	40
Rated Input	540rpm	540rpm
Input/Output Description	Hexagon Spline ( 1 3/8 Z6 )
Input/Output Description		Inner Hexagon
Net Weight	20.5kg	20.5kg

Item No.	HC-0958
Ratio	4.08:1
Teeth	12/49
Module	4.5
HP	50
Rated Input	540rpm
Input/Output Description	Hexagon Spline ( 1 3/8 Z6 )
Input/Output Description		Optic Axis
Net Weight	58.5kg

Item No.	HC-0961T-1	HC-0961T-2
Ratio	1:1.3	1.3:1
Teeth	26/20	20/26
Module	5.644	5.644
Rated Input	540rpm	540rpm
Input/Output Description	Hexagon Spline ( 1 3/8 Z6 )
Input/Output Description		Hexagon Spline ( 1 3/8 Z6 )
Net Weight	57.5kg	57.5kg

NMRV Series Transmission Gearboxes

RV Series Gear Box For Belt Drive

NRV Series Speed Reducer

PF PLF ZDF ZF Planetary Gearbox

WPA WPS Cast Iron Case Worm Gearbox

Marine Gearbox For Work Boat

Gearbox Manufacturers For Agricultural Machine

90 Degree Reducer For Concrete Mixer

Worm Gearbox Reduction For Conveyor Mill Machine

Right Angle Worm Gear Box

MW High Torque Transmission Gearboxes

Speed Worm Gear Reducer

Raydafon?Technology?Group?Co.,Limited is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years' experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers' special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we'll check.

Hot Tags: Good Reputation Bevel Car Small Reverse Gear Reducers For Belt Conveyor - Buy Gear Reducers worm Gear Reducer gearbox Reduction Product on Raydafon Technology Group Co.,Limited

Related Category