Our Photocell and Alarm Light and Control Board is a state-of-the-art integrated system designed for security and automation applications. It combines precision light sensing, audible and visual alerts, and intelligent control in a single, robust unit. Ideal for industrial, commercial, and residential use, this product enhances safety by detecting environmental changes and triggering responses automatically. With durable construction and user-friendly features, it ensures reliable performance in various conditions, from low-light areas to high-traffic zones. The system is engineered for easy installation and low maintenance, making it a cost-effective solution for modern security needs.
| Parameter | Specification |
|---|---|
| Photocell Type | Cadmium Sulfide (CdS) sensor |
| Detection Range | 0.1 to 1000 lux |
| Alarm Light Output | 1000 lumens, 6000K cool white |
| Control Board Voltage | 12V DC, 24V AC/DC compatible |
| Power Consumption | Standby: 2W, Active: 15W max |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Dimensions | 150mm x 100mm x 50mm (L x W x H) |
| Weight | 250 grams |
| IP Rating | IP65 (dust-tight and water-resistant) |
| Warranty | 2 years limited warranty |
To install the Photocell and Alarm Light and Control Board, first, ensure power is disconnected. Mount the unit in a location with adequate exposure to ambient light for the photocell, avoiding direct sunlight or shadows that could cause false triggers. Use the provided screws and brackets for secure attachment. Connect the wiring according to the color-coded terminals: red for power positive, black for negative, and green for ground. For the control board, set the sensitivity dial to the desired level based on your environment. Test the system by simulating light changes to verify proper operation. Regular cleaning of the photocell surface is recommended to maintain accuracy.
What is the typical response time of the photocell?
The photocell responds within 0.5 seconds to light changes, ensuring swift detection and activation.
Can the alarm light be customized for different patterns?
Yes, the control board allows programming of up to 5 flashing patterns via dip switches or software interface.
Is this product suitable for outdoor use in rainy conditions?
Absolutely, with an IP65 rating, it is fully protected against dust and water jets, making it ideal for outdoor applications.
How do I adjust the sensitivity of the photocell?
Use the potentiometer on the control board; turn clockwise to increase sensitivity and counterclockwise to decrease it.
What is the expected lifespan of the LED alarm light?
The LED has a lifespan of approximately 50,000 hours, ensuring long-term reliability with minimal maintenance.
Can I integrate this system with my existing security setup?
Yes, it features standard output relays and protocols like dry contact, allowing seamless integration with most security systems.
Does the control board support wireless connectivity?
No, it is designed for wired connections only, but add-on modules may be available for wireless options.
What should I do if the alarm light fails to activate?
Check power connections, ensure the photocell is not obstructed, and verify sensitivity settings; consult the troubleshooting guide for more steps.
Is there a way to test the system without waiting for dark conditions?
Yes, cover the photocell with an opaque material to simulate darkness and trigger a test response.
Are replacement parts readily available?
Yes, common components like photocells and LEDs can be purchased separately through authorized dealers.
